6 Key Tips For How to Paint a Car

If you want to paint your car to make it look brand new, you’ll need the right tools and supplies. While some of these items, like exterior latex paint and primer, are pretty standard, others may not be so familiar to you. While spray painting can seem easy enough, there are a few tricks that can make the whole process even easier. With these tips on how to paint a car in Nick Dent Care. You’ll be ready to go in no time at all!

1) Clean the car surface before painting.

Start by thoroughly cleaning the surface of the car, making sure there is no dirt or other material that will interfere with the paint. You can use a pressure washer to remove stubborn dirt and then clean it with soap and water. Next, cover any chrome surfaces on your car with painter’s tape. Use masking tape for any large areas. Masking tapes are also available in different colors so you can match them to your car’s color scheme. Finally, lay out tarps or sheets in your work area so you have a place for all of the paint containers and brushes after you finished painting.

2) Use painter’s tape to protect areas you don’t want to be painted.

Nick Dent says that the best way to protect parts of the car you don’t want to be painted is with painter’s tape. Painter’s tape can easily be removed and usually doesn’t leave any damage behind, plus it will keep your fingers and other body parts free from getting paint on them as you’re moving around your vehicle. Dent also mentions using lots of clean rags to protect surfaces that can’t be covered, like electrical or anything sharp or difficult to wrap. And because this is probably obvious: never use the newspaper. You’ll just end up taping it onto the car before realizing it has too many ink colors running through that are hard to see.

3) Choose the right paint.

The right paint is key. It will affect the appearance and durability of your car painting project. There are many types of paints on the market and they vary in cost, sheen level, coverage, color, and durability. Choosing the right paint can be difficult but we’ve made it easy for you with our handy guide below!

The most popular brands include:

Acrylic, Oil Based Enamel, Urethane

4)Use a quality Primer

Nick Dent is a professional automotive painter and offers some tips on how to paint your car. One way to ensure the longevity of your paint job is by using a quality primer before painting. He notes that primer will fill any small imperfections in the metal, sand it down, and give you an even surface. A good primer also acts as a bonding agent for the top coats of paint which means that you are less likely to experience chipping or peeling.

5) Let the paint dry completely between coats.

Before you put on the next coat of paint, make sure it’s dry. Otherwise, you’ll just be painting on top of wet paint and it’ll start to peel off. It may take as long as two hours for the paint to dry depending on what kind you’re using and how hot or cold it is outside. So try not to go too long in between coats. Nick Dent

6) Apply a clear coat after the final paint coat dries.

Nick Dent, the co-owner of Nicks Dent Care in Denton,TX, has tips for anyone who wants to paint their car.

1. Prep your vehicle thoroughly.
2. Get an estimate and buy enough paint and supplies.
3. Research your color choice before you paint.
4. Practice on scrap metal before painting your car with it the first time or hire someone else if you are not sure of your ability or skill level – both will save you headaches later on down the road!
5. Apply a clear coat after the final paint coat dries and is fully cured, which usually takes up to 14 days for most paints in dry weather conditions
6. Use good quality materials such as high-quality primer and top coats that are designed for automotive use