The red light issue is the most common problem with Linksys range extenders. You are in serious trouble if the LED light on your Linksys range extension also flashes red.
Don’t waste your time worrying about this technical problem. You can fix it quickly by following the troubleshooting tips below.
Rectified: Linksys Extender Red Light Issue
1. Check the Power Supply
The main reason you’re experiencing the Linksys extension red light problem is an improper power supply. You should inspect the power socket where your Linksys extender plugs. It is a good idea to check the power socket where your extender is plugged.
2. Switch to another Connection Source
It is obvious that the Linksys wireless range extender has been connected to the router via a wireless source. To resolve this problem, you should switch to another connection source. We mean that you must use an Ethernet cable to connect to your devices.
Make sure the cable isn’t damaged or worn. It should also be free of any cuts.
3. Reduce Distance between the Devices
To troubleshoot the red lights, you can bring your Linksys wireless extender near your router. This will ensure that your wireless devices can transmit signals properly despite being separated by a distance.
Note – Your devices shouldn’t be able to stick to one another in literal terms. You could end up with further technical problems if your WiFi signals clash.
4. Update Linksys Firmware
If the Linksys extender red error persists, it is recommended to update your firmware.
These steps will assist you in updating your firmware on your Linksys range device.goog_1478218277
- Use your smartphone’s internet browser to access the Internet.
- Log in to your Linksys extensioner with the default admin details.
- After you have completed the Linksys Velop setup wizard, click on the Firmware Update button.
That’s all! Check the status of your Linksys wireless extender’s LED.
5. Avoid Signal Interference
The Linksys extender red lights can be fixed by keeping WiFi interference at bay. You can eliminate WiFi interference by putting your extender away form the following:goog_1478218279
- Aluminium studs
- Concrete walls
- Fish tanks
- Microwave ovens
- Cordless phones
- Bluetooth speakers
- Monitors for babies
- Washing machines
You should also keep the Linksys range extender out of reach of any utensils that contain a lot water.
6. Factory Default Reset
The last hack did not solve the red light problem. This requires a quick factory reset. Follow these steps to learn how to reset your Linksys extender within minutes.
- Locate the Reset button on the Linksys extender.
- After pressing the button, hold on for a while.
You will now need to configure your Linksys router login using the web address.
You will see that this is the end of our guide to troubleshooting the Linksys extender blue light issue. We hope you found the above hacks helpful and that the red light issue has been resolved.
It is a good idea to leave a comment in the comments section if you enjoyed reading this post.