My Netgear Router Won’t Let Me Log In. Why?

If you want to make changes to the settings of your Netgear WiFi router, then you are supposed to log in to it. But, there are a number of users who cannot log in to their routers. Just in case you are also facing Netgear Nighthawk router login problems, have a nudge on the points discussed in this post. They will reveal the reason behind getting the problem along with the suitable technique to fix it. But, prior to that, let’s give a trial to the power cycling process. Perhaps, it is only a network glitch due to which your router is not letting you log in.

How to Power Cycle a Netgear Router?

The power cycle is a simple process of rebooting the WiFi router. It means you just have to turn off your WiFi device and turn it back on. The steps mentioned below will help you learn how to power cycle a Netgear wireless router.

1. Disconnect your modem from the wall socket after powering it down.

• It is the router’s turn now.

• Now, you have to wait for 10-15 minutes.

• Now, power on your router followed by the modem.

As soon as the LED lights on your router gain some steadiness, you can try logging in to the router. Are you still unable to log in to it? If yes, then walk through the techniques given in the next section to troubleshoot the problem.

Solutions: Netgear Router Won’t Let Me Log In

• Check Wired Connections

The very first reason why your router is not allowing you to log in to it is a weak internet connection. It can happen if the wires linked to your router are not working well. Yes, we are talking about the LAN cables. Chances are that one connecting your router to the modem or computer to the router is damaged. Verify the same and replace the cable in case of any damage.

You also need to ensure that the LAN connections made by you are finger-tight and the correct ports of your WiFi devices have been utilized for the same. To be specific the LAN port of the modem should be connected to the Internet port of the router. However, if Nighthawk login issues are still troubling you, you can move to the next hack.

• Connect to the Correct Network

You need to be connected to the WiFi network of your router to get success with the login process no matter whether you are using the Nighthawk app or web GUI. But, it seems that you’ve connected your computer or mobile phone to some anonymous network. So, rectify your mistake right away and connect your device to the router’s WiFi network.

However, you need not to connect your computer to the router’s WiFi network in case you have cabled it to the router’s LAN port. And yes, to connect to the WiFi network, you need the WiFi password of the Netgear router network.

• Update the Web Browser

This point comes into the picture when you are logging in to your wireless router using the web graphical interface. Know that the login process will remain incomplete if you keep using an outdated version of the browser no matter whether it is Google Chrome, Apple Safari, or Microsoft Edge.

Therefore, upgrade the internet browser you are using. The Settings section of the web browser will help you do that. However, you must update the Nighthawk app via the app store of the mobile phone if you are using it. Else, there are chances of getting stuck with the Nighthawk app not working issue. Logging in to the router will become a distant thing.

The Bottom Line

That’s all you can do if your Netgear router won’t let you log in. We hope that you will be able to complete the login process using the troubleshooting techniques highlighted above. However, what will you do in a scenario if every login attempt fails? Well, first of all, check the login details. And if doing so also is of no use, you must reset your WiFi router to the default factory mode. For this, press and hold the RESET button present on the router for 15 seconds. Once done, log in to the router using the default password.