Why Am I Unable to Update Netgear Extender Firmware?

Various users out there update the firmware of their Netgear Nighthawk range extenders in the hope that after completing the process they will embark on a fresh digital journey. But, things can be awry if the firmware update turns out to be a never-ending process and in case it ends, all the user experience is a disappointment. Are you also unable to update the firmware of your Netgear range extender via mywifiext.net? Well, that can be happening because of a poor internet connection.

Thus, before jumping to an anonymous conclusion and implementing any technical troubleshooting, be very sure that you are connected to an internet connection with supersonic speed. Run a speed test on the computer to verify the same. On the off chance, there is anything wrong with the internet connection, then fix it. Check out the info provided in the upcoming section to perform workarounds with respect to the internet connection so that the firmware update can be performed easily.

Fix Internet Issues to Get Success in Firmware Update

Have a good look at the entire length of the cable connecting your Nighthawk WiFi extender and the main router. Is it intact? Or have you noticed some cuts on its periphery? If it is the second question that has received a positive response, then get the cable repaired immediately. But, make sure to pick a non-damaged one this time.

Apart from using a non-damaged cable, you also need to ensure that you have established the connection using the correct ports. It means the LAN port of the router and the Internet port of the range extender should have been for creating the WiFi devices’ connection. If it is perfect, you may proceed and learn what other reasons might be halting your success in upgrading the extender’s firmware version.

Other Reasons: Netgear Extender Firmware Failure

The Incorrect Firmware File

Did you carry out the firmware update process using the manual approach? If yes, then there may be a chance that you have uploaded the incorrect firmware file on your wireless range extender. For your information, you are supposed to always upload a file that belongs to the model number of your range extender. If the firmware file version does not correspond to the extender model you own, you might end up bricking it after getting a failure in upgrading the firmware.

Unnecessary Activities

This point applies to the manual as well as the automatic firmware update process. Perhaps, you were not patient enough while the firmware update process was going on. Due to this, you interrupted the firmware process by playing games on the computer or switching tabs. Keep in mind that you need to let the firmware update get completed without any interruption to ensure 100 percent success. Apart from this do not power down the extender or router during the process or disconnect your WiFi devices.

Outdated Web Browser

The least bothering but still, considerable one reason behind the Netgear extender firmware update failure is the use of an outdated web browser. The reason being, an outdated web browser is known to stall the management process of various networking devices. So, you need to navigate to the Settings section of the web browser and install the latest software version. Moreover, you are required to wipe out the cache, cookies, and browsing history of the browser.

After following the tips given above, you will be able to upgrade the firmware of your wireless range extender without any hassle. However, if you still fail, you should look forward to learning how to reset Netgear extender. For this, the user book of the extender will come to your aid.

Wrapping Up

And with that, we are now wrapping up the post that aimed to reveal the techniques to follow if you are unable to update the Netgear extender firmware. We are anticipating that you will achieve success with the firmware update process after following them.