Home » The Ultimate Guide To Making Your Own Pillow Boxes Covers

The Ultimate Guide To Making Your Own Pillow Boxes Covers

by Uneeb Khan

Do you love sleeping on your own? Do you hate when your pillow slips off the bed and ends up on the floor? If so, you’re not alone. Lots of people love sleeping on their own, but they hate having to get up to grab their pillow whenever it falls off the bed. That’s where pillow covers come in.

They protect your pillow from dust and dirt, and they keep it in place so you can sleep soundly without worrying about it slipping off the bed. Making your own pillow covers is a great way to save money, and it’s also a fun project. In this guide, we will walk you through the process of making your own pillow box covers. Don’t wait – start making yours today!

Build Your Own Pillow Boxes With These 2 Steps

Making your own Pillow Boxes covers is a great way to personalize your bedding and add a little extra flair. It’s also a great way to save money. Here are two easy steps to follow:

1. Start by tracing the shape of your cover onto some batting or foam insulation. Make sure the tracing is accurate; you’ll need this template later on.

2. Cut out the cover shape using an X-Acto knife or a cutting board with a sharp edge. Be careful not to cut too deep—you just want to create a rough outline of the cover.

3. Carefully remove the excess material with a pair of scissors, leaving a clean, finished edge around the perimeter of the cover.

4. Next, fill in any gaps or holes that may exist in your cover with stuffing (either polyester fiberfill or cotton batting). You can also add decorative pieces, like fringes or sequins if desired.

5. Finally, hot glue (or staple) the cover onto the batting/foam inside of your pillowcase, making sure to line up all of the edges carefully so that it’s perfectly symmetrical (or as close to it as possible).

5 Tips For Making Pillow Boxes

Here are 5 tips for making pillow boxes covers:

1. Start with a sturdy piece of fabric.

Choose a fabric that is strong and durable, but also soft enough to provide comfort when you sleep on it. A cotton or linen fabric will work well for this purpose.

2. Cut the fabric to the desired size and shape.

You will need to cut out two pieces of fabric: one larger than the other. The larger piece will be the cover, and the smaller piece will be the cavity inside of it. The dimensions of your cover should be about twice as long as the height of your pillow inside of it, plus an inch or so on either side of the height of your pillow. The cavity should be about one-third the width of your cover and just big enough to fit your pillow comfortably.

3. Sew together the pieces of fabric using a seam allowance of at least 1 inch (2.5 cm).

Make sure that you sew all around the edge, including along the bottom and up along both sides. This step is important because it will help create a durable seam that won’t come apart easily in the wash.

4. Trim off any excess fabric from around the edges of your cover and cavity.

Leaving a nice smooth finish overall. You can also add decorative trim if desired using tiny stitches or a hemming machine.

The Best Way To Easily Package Your Pillow Boxes

Looking to package your pillows in a way that makes them easy to transport and store? Then you’ll love making your own pillow box covers! Here are four easy methods to get started:

1. Use a Pillow Boxes Frame

This is the simplest method, and it works great if you have some basic sewing skills. All you need are a few pieces of fabric and a pillow frame. First, measure the size of your pillow cover and cut out the fabric accordingly. Next, sew the fabric pieces together along one long edge, making sure to leave a 1-inch opening at the top for inserting your pillow. Finally, turn your cover inside out and press it closed.

2. Make a Pillow Case Cover Out of Fabric Tapestry

If you don’t have any sewing skills or want an extra challenge, try using fabric tapestry instead of fabric. To make this type of cover, first choose a piece of fabric that’s large enough to fit around all three sides of your pillowcase (one for the front, one for the back, and one for the side). Then, use a needle and thread to start tying off each corner of the cloth in a knot form. This will create an ” Inside Out” effect as you tie off each corner. Now just repeat these steps until you’ve covered all three sides of your case with a cloth tapestry. When finished, ironing can help bring out the colors in your

How to Make Your Pillow Covers

If you’re like most people, you probably don’t have a lot of extra pillow covers lying around your house. But that doesn’t mean you can’t make your own! In this tutorial, we’ll show you how to make your own pillow covers using just a few supplies and some simple sewing skills.

First, gather your supplies: a piece of fabric measuring about 18 inches by 12 inches (45 cm x 30 cm), a Sewing Machine, Thread, and an Iron.

Next, lay out the fabric on the workspace so that one long edge is aligned with the edge of the sewing machine table. Then fold the other end in half so that it matches up with the first fold. Mark the folded edge with a sharpie or pencil so that you know where to start stitching when you begin.

Now open up the sewing machine and set it to the appropriate stitch length (usually 3 or 4). Sew along the marked line using a zigzag stitch (or another decorative stitch if you prefer). Be careful not to overstitch – just enough to hold everything in place while you finish up later on.

Once the entire seam is sewn shut, turn the pillow cover over so that the unfinished side is facing down and press it gently with a hot iron. Then repeat these steps with any additional pillow box covers that you might want to create.

Tips for Making the Perfect Pillow Boxes

Making the perfect pillow boxes covers can be a fun and easy project for any seamstress or tailor. Here are a few tips to help you get started:

1. Consider your design goals. Do you want a simple cover with no adornments, or do you need something more elaborate?
2. Choose your materials wisely. You don’t need to spend a lot of money to make a beautiful pillow box cover, but you do need to choose materials that will withstand wear and tear. A sturdy fabric like cotton or linen is ideal, as are materials that can be washed easily (like rayon).
3. Follow theFit Your Pattern guides provided with your patterned fabric. These will give you specific instructions on how much allowance to make for seam allowances, and where to sew those allowances.
4. Take time to cut out your pieces correctly. Fitting and cutting your pieces correctly is key to getting an accurate result from your sewing efforts. Follow the given measurements very closely, and use a guide if needed to ensure accuracy.
5. Sewing basics always apply when making pillow box covers—use a straight stitch wherever possible, keepThread Tension even throughout the entire row, and back stitch only if necessary (for extra strength).


If you’re looking to spruce up your bed room and add a little bit of personality, making your own pillow boxes covers is the way to go. Not only are they simple to make, but they can also be customised to fit any style or colour scheme. With so many different options available, it’s hard not to find the perfect cover for your needs. So take some time out and give this easy DIY project a try – you won’t regret it!

Related Posts

Marketmillion logo

MarketMillion is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: [email protected]

@2022 – MarketMillion. All Right Reserved. Designed by Techager Team